KORDA SINGLEZ System
This unprecedented rod holder system for carp fishing revolutionizes fishing in “spike + buzzbar” mode by cancelling all its defects: with the Singlez your rods will be stable and will not turn at the slightest pull.
The Korda Singlez system is made by JAG company with high-quality stainless steel and allows you to choose and customize almost all the elements.
For a complete system (pertaining only to your front detectors, you will need to double each quantity if you also want to equip your rear supports with the Singlez system), you need:
? 2 or 3 “Upright” detector supports depending on the number of your rods. Of course you can go 2×2 if you have 4 rods. You can choose between 3 lengths: 7.5 / 12.5/15cm, both will determine the height of your rod in relation to the ground.
? A Singlez buzz bar, you can choose 3 lengths in 3 rods (23 / 25.5 and 29cm) or 4 lengths in 2 rods ( 11.5 / 12.5 / 15.5 / 16.5cm). You need 2 of 2 rods if you have 4 rods.
? A “Spike” per buzzbar.
? A “Spike ball” stabilizer per “Spike”.
? An “Extension section spike” per “Spike”, it will increase the height of your rods from the ground, it is not essential but useful for getting over reeds for example.
Example for a 2-rod setting for your detectors, for stalking (without holding the rods at the back) you need:
? 2 “Upright” supports of 15cm
? 1 buzzbar 2 rods 16.5cm
? 1 “Spike”
? 1 “Spike Ball” stabilizer
Composition of the Singlez system
Reviews
There are no reviews yet.